GRASS INSTALLATION
Process
The process may vary depending on the gardener’s methods and the specific needs of each garden. We focus on using materials and techniques tailored for Mediterranean gardens.
01
Area Preparation: Clear the ground of debris, plants, and rocks
Soil Excavation : Dig to a depth of about 2-3 inches.
02
Base Layer Installation: Spread crushed stone or sand for proper drainage and spread diferentes layers of gravel for ground leveling.
04
Anti-weed mesh installation: To prevent gorwth.
03

Base Compaction: Use a compactor to level and firm the base layer
05
Turf installation: Lay the artificial grass over the prepared base. Trim the edges to ensure a perfect fit. Use adhesive to connect the edges and anchor the turf with landscape staples or nails
08
Final result: minimum maintenance
07
Sand Infill: Spread sand to enhance stability and weight.
06
Fiber Brushing: Brush the grass fibers with a broom to lift them.
Process
The process may vary depending on the gardener’s methods and the specific needs of each garden. We focus on using materials and techniques tailored for Mediterranean gardens.
01
Area preparation: Clear the ground of debris, plants, and rocks
02
Irrigation Installation: Depending on clients' choice we install dripping irrigation or sprinklers and ground preparation.
03
Ground leveling: fertilized soil after severeal layers of gravel or antiweed mesh installation is spread.
04
Grass installation: a mix of seed and gramma are installed evenly acorss the soil.
05
Grass installation: a mix of seed and gramma are installed evenly acorss the soil.
06
Watering and Maintenance: Regular watering is done until the grass establishes, followed by reduced watering for maintenance
08
Watering and Maintenance: Once the grass reaches 5-8 cm in height, mowing begins to keep it neat and encourage further growth.
09
Process
The process may vary depending on the gardener’s methods and the specific needs of each garden. We focus on using materials and techniques tailored for Mediterranean gardens.
01
Area preparation and irrigation installation
02
Fertilized soil extension and ground leveling
03
Deeps soil watering: Water the soil thoroughly to help it settle and ensure moisture for the turf installation.
04
Tepes installation: lay the pre-grown grass rolls evenly across the prepared soil, fitting them tightly together.
06
Affix the tepes: Press the tepes down with a roller or foot traffic to ensure good contact between the turf and soil.
07
Mowing: Once the grass reaches 5-8 cm, mow to maintain a healthy, neat appearance and encourage further growth.
Frequently asked questions
Here are some common questions about grass installation
Artificial grass requires no irrigation or regular maintenance, while natural grass needs constant care such as watering, fertilizing, and mowing. However, natural grass is more eco-friendly, helping to reduce temperatures and improve air quality.
In the Mediterranean climate typically takes 3 to 4 weeks to germinate and 2 to 3 months to fully establish, depending on the warm temperatures and water availability. Regular watering is essential, especially during the hotter and drier summer months.
Yes, natural grass requires an irrigation system to ensure proper growth, especially during the first few months. Sprinkler or drip irrigation systems are installed to keep the grass healthy and prevent it from drying out.
Contact us
Feel free to contact us if you have any questions or need assistance. Use our contact details, our team is here to help and will respond as soon as possible.

Email remafvilla2017@gmail.com
Phone +34 666 00 48 10